Infant Incubator Oxygen Sensors

Replacement oxygen cells for Dräger Isolette and ATOM infant incubators, including the Isolette C2000 and 8000 and the ATOM 2000 and 2100. Search by incubator model or OEM part number.

Need help? Contact us

Check Incubator Oxygen Sensor Compatibility

Follow these steps to review a replacement oxygen cell before ordering.

  • 1. Identify your equipment

    1. Identify your equipment

    Note the ventilator manufacturer, full model name, and OEM oxygen sensor part number.

  • 2. Find the listed sensor

    2. Find the listed sensor

    Search NRC Pure’s compatibility table using your equipment model or OEM part number to identify a listed replacement.

  • 3. Review the documentation

    3. Review the documentation

    Compare the selected sensor’s datasheet with your equipment requirements and instructions for use (IFU).

  • Need help identifying your sensor?

    Send a clear photo of your current sensor’s label, along with the ventilator manufacturer and model. We can help you review possible matches.

    Send a photo ›

Frequently Ask Questions 

How long can spare oxygen cells be stored?

The M-12 has a recommended shelf life of under six months. The M-12A and M-08 pages give a storage temperature range of −20 to +50 °C. Keep spares in their original packaging and order only what you will fit within the shelf life.

How long does an oxygen sensor last in an infant incubator?

The M-12 is rated at more than 500,000 Vol.% O₂ hours, with a sensor lifetime of under three years in ambient air, depending on the application. The Isolette C2000 controls oxygen between 21 % and 65 %. At 65 % oxygen, 500,000 Vol.% hours is about 7,700 hours, or roughly ten months of continuous use. At room air it is about 23,800 hours.

Which oxygen sensor fits my Isolette or ATOM incubator?

The NRC Pure M-12 is listed for the Dräger Isolette C2000, 8000 and 8000 plus. The M-12A is listed for the ATOM 100 and 101 Dual Incubator and the ATOM 2000, 2100 and 2100G V2200. The M-08 fits the older Dräger Incubator 8000 only. The Isolette 8000 and some ATOM models are listed under both the M-12 and M-12A, so check the part number on your current cells before you order.

Can I order incubator oxygen sensors in bulk?

Yes. Contact NRC Pure with the required sensor models or part numbers, quantities, delivery destination, and preferred delivery date. Our team can review pricing and availability for your order.